HS Series Single Shaft Hard Plastic Shredder

Built around your material and production goals.

HS series is big sized single shaft shredder with large internal volume. The redesigned hydraulic pusher not only improves the power transmission and pushing speed, but also effectively avoids the occurrence of material blocking and the wear of the internal guide rails. This specially designed device creates about 35% more space in the cutting chamber.

This series shredder adopts high-efficiency V type rotor design. The minimum width of the rotor is 1200mm, the maximum width is 2000mm, and the rotation diameter is 560mm. The rotor is driven by heavy duty gearbox. The low speed of 85rpm ensures smooth running with high torque.

The hydraulic station is tightly integrated with the shredder chamber, which saves space and protects the hydraulic station. It is also easy to replace and maintain. The whole machine is welded by a special welding process, which can greatly improve the stability of the whole machine and can effectively prevent splashing.

At the same time, the HS series has all the advantages of other shredders, including the special design of rotor knives and knife holders, external bearings, and convenient and advanced intelligent control systems.

What Can It Shred?

HS series hard plastic shredder is designed to meet the requirement of waste recycling in various industries, including bulk materials, pipes, films, woven bags, and all kinds of electric cable scrap, IBC buckets, waste paper, used wood and various organic materials.

Typical applications include:

• Plastic bottles and containers — PET bottles, HDPE bottles, plastic buckets
• Bulk plastic products — plastic pallets, crates, baskets, empty drums
• Pipes and profiles — HDPE pipes, plastic profiles, PVC pipes
• Flexible materials — plastic film, woven bags, packing bags, airbag cloth
• Engineering plastics — PA6 fiber, nylon waste, EBS foam, LCP film, plastic purge
• Special materials — lithium-ion battery separators, waste paper, used wood, organic waste

Key Components

Belt Conveyor — Plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor. Motor drives cooperate with ABB inverter; feeding speed is fully automatic based on chamber fill level.

Metal Detector (Optional) — Ferrous metal permanent magnetic belt or metal detector prevents metal specials from entering the crusher and effectively protects the blades.

Hopper — Specially designed to avoid material flying out. Can be loaded by conveyor belt, forklift, crane or wheel-loader. Adapted to individual requirements for continuous material supply.

Hydraulic Ram — Hydraulically operated pusher feeds material towards the cutter automatically by load-related controls. Equipped with overflow valves and volumetric flow controls.

Rotor — Made of seamless steel pipes with 560mm diameter operating at 85 rpm. The concave ground, aggressive and 4-way rotating knives are mounted in the grooves of the rotor for high flow rate and low power consumption.

Knife Blades — DC53 material with higher hardness (62-64 HRC) than D2/SKD11 after heat treatment. Twice the toughness of D2/SKD11 with superior wear resistance and substantially higher fatigue strength.

Screen — Mounted beneath the rotor to determine flake size. Easily accessible via a separate flap, opened or closed hydraulically.

Shredder Chamber — Welded with 30mm ultra-high hardness steel plate, wear-resistant, corrosion-resistant, low-noise, long service life.

Tool Installation — The tool can be quickly adjusted outside the machine, which minimizes downtime and makes tool replacement easier.

Motor & Control — Adopt imported WEG brand motor, low energy consumption, low noise, long service life. The whole model adopts frequency conversion control and conforms to CE/CSA international standards.